Based on the mature electric control reversing concrete pump, DAWIN Company has developed the full hydraulic control concrete pump with
excellent performance after years of efforts. This hydraulic system
pump has been deleted the four most vulnerable components of the previous concrete pump, that is, PLC, constant
pressure pump, accumulator, and proximity switches, the move
greatly improved the overall reliability of the machine, reduced
the maintenance costs in the latter part, ensured that the machine
can operate safely in harsh conditions. The main kind of products
is all types of motor (diesel) concrete pumps featuring throughput:
30-120m³ / h, concrete delivery pressure: 5-20MPa
Radiator: Adopts the air-cooled plate-fin radiator to ensure that the
system could operate in a maximum temperature allowed.
The main oil pump: Adopts the German Hawe / Rexroth / Japanese Kawasaki series.
Lubrication system: Adopts the automatic multi-point lubrication technology featuring
one to one lubrication with better efficiency and the extending
service life of wearing parts.
Power system: The power of motor series uses the well-known
domestic and foreign brands: Yantai motor, Qingdao motor, Siemens Beide motor.
Diesel Series: Power system employs the original Volvo and Lovol diesel engine.
Electrical parts: The main electrical products adopts Schneider, LG products to the
reliability of the electronic control system.
Hydraulic Hose Fittings: Adopts the US Eaton products to ensure the safety of the
hydraulic system, no leakage.
Large cylinder seals: Large cylinder seals adopts the US Parker products.
S valve: Employing the manganese steel overall casting, the wearing
surface adopts wear-resistant materials featuring the dual
advantages of pressure and abrasion resistant.
Glasses plate cutting ring: Glasses plates and cutting ring inlaid adopts the carbide hard to ensure a durable design.
Pistons: Adopts the imported materials and precision machining, with excellent qualities: Hydrolysis resistance, wear resistance and
high temperature resistance.
|Whole machines performance||Theoretical max. Discharging volume||M³/h||40||50||60||80|
|Theoretical max. Delivery pressure||MPa||07||12||15.7||12.5|
|Max. Delivery frequency||Times/min||24||20||22(low pressure); 13(high pressure)||26(low pressure); 16(high pressure)|
|Theoretical max. Delivery distance||Vertical||M||120||150||250||180|
|Distribution valve type||S tube valve||S tube valve||S tube valve||S tube valve|
|Specification of delivery cylinder||mm||Φ160×1000||Φ200×1200||Φ200×1650||Φ200×1650|
|Specification of main oil cylinder||mm||Φ100/Φ70×1000||Φ125/Φ80×1200||Φ140/Φ90×1650||Φ125/Φ80×1650|
|Oil tank capacity||L||300||300||420||420|
|Outlet opening diameter||mm||Φ125||Φ150||Φ150||Φ150|
|Inner dia. Of delivery pipe||mm||Φ100||Φ125||Φ125||Φ125|
|Power system||Main motor power||Kw||45||55||110||110|
|Hydraulic oil circuit type||Open circuit||Open circuit||Open circuit||Open circuit|
|Max. Oil pressure of pumping system||MPa||28||28||32||32|
|Max. Oil pressure of mixing system||MPa||14||14||14||14|
|Max. Mixing speed||R/min||30||24||24||24|
|Other parameters||Allowed range of concrete slump||mm||80~200||80~200||80~200||80~200|
|Max. Diameter of aggregates||mm||30||Pebble 40, crushed stone 30||Pebble 50, crushed stone40||Pebble 50, crushed stone40|
XBS, DXBS series of products is the mortar transportation equipment specially developed for the features of floor heating construction, suiting for fine aggregate concrete filled layer
during floor heating engineering or the large area and high efficiency construction of mortar
filling layer. XBS series products are also suitable for all types
of construction projects in the transport of fine stone concrete,
refractory, insulation materials transportation, the transportation
of green soil in the ecological environment construction and
pressure grouting of various foundation piles.
XBS-series fine stone pump have transformed from the original Φ80
delivery tube to Φ100 delivery tube, which can transport the <3cm concrete, so XBS-series fine stone pump has more versatile
function. (like transport mortar, fine stone and large aggregate
Electronic control system: High degree of automation and reliability, major appliances
adopts Schneider, LS.
Lubrication system: Adopting the automatic multi-point lubrication technology
featuring one to one lubrication, with better efficiency and the
extending service life of wearing parts.
Hydraulic system: The new application of liquid control reversing technology makes pumping more reliable and lower failure rate in the hydraulic system. It can configures the valve specially manufactured for the liquid control
system, features with large flow and have lower power and less impact and longer life.
The main oil pump: Adopts the constant power variable plunger pump of the joint venture brand, so that the constant power control could effectively
prevent motor and diesel overload and could withstand higher
pressures and loads than conventional gear pump, so as to ensure
the system running smoothly and reliably, the overpressure relief
function can effectively protect the main pump and the diesel
Power system: The electric fine stone pump adopts the well-known domestic and
foreign brands: Yantai motor, Siemens Beide motor, the fine stone
pump of diesel engine adopts low-power high-efficiency Tianjin
Hopper device: Increased volume, added the fence, equipped with vibration motor,
to meet the requirements of fine concrete pumping.
Cooling system: Adopts the air-cooled, water-cooled twin cooling system, which
not only adjusts to the cold climate, but effectively controls the
hydraulic oil temperature so as to ensure the safety and
reliability of equipment operation.
Hydraulic pipe fittings: The hose is imported from Italy and the joint is the US Eaton
products, the hose connector assembly sets is provided by Eaton,
aiming to ensure the safety of the hydraulic system.
S valve: Adopts the manganese steel overall casting and the wearing surface
adopts wear-resistant materials featuring the dual advantages of
pressure and abrasion resistant. Lumen transition is smooth,
providing with unimpeded flow of concrete, so that the pumping
performance has been further improved.
,: , .
Glasses plate: The cutting loop was made by cemented carbide with durable service.
Glasses plate cutting loop: Glasses plates and cutting loop inlaid adopts the carbide hard to
ensure a durable design.
The features and advantages of the full hydraulic control hydraulic
Extending component life: Adopts full hydraulic control reversing hydraulic systems,
pumping, S tube is assigned to the alternate action without
involving in the electrical signal with less reversing impact and
lower noise and can significantly improved the service life of
hydraulic pump and hydraulic valve.
Improving equipment reliability: Full hydraulic control system eliminates the intermediate links
of electrical control signal and the move greatly improves the
reliability of the entire equipment.
Reducing the failure frequency: The full hydraulic control system adopt the centralized valve
plate, puts the main hydraulic valve system to the valve plate and
reduces pipe cross-connect, so that the system becomes more compact
and lows leakage chances.
Lowering maintenance costs: The system deletes the four most easily damaged components in the
electric control commutation system and reduces the maintenance
costs of the equipment.
|Whole machine performance||Theoretical max. Discharging volume||M³/h||25||40||30|
|Theoretical max. Delivery pressure||MPa||12||13||13|
|Max. Delivery frequency||Times/min||24||30||30|
|The type of distribution valve||S tube valve||S tube valve||S tube valve|
|Specification of delivery cylinder||mm||Φ140×800||Φ140×800||Φ140×800|
|Specification of main oil cylinder||mm||Φ80×Φ50×800||Φ80/Φ50×800||Φ80/Φ50×800|
|Outlet opening diameter||mm||Φ125||Φ125||Φ125|
|Power system||Rated voltage||V||~380||~380||~380|
|Main motor power||Kw||30||45||37|
|Assistant motor power||Kw||3||3||3|
|Hydraulic system||Hydraulic oil circuit type||Open circuit||Open circuit||Open circuit|
|Max. Oil pressure of pumping system||MPa||25||25||25|
|Max. Oil pressure of mixing system||MPa||9||9||9|
|Max. Mixing speed||R/min||24||24||24|
|Oil tank capacity||L||200||200||200|
|Other parameters||Max. Diameter of aggregates||mm||≤25||25||25|
|Inner dia. Of delivery pipe||mm||Φ80||Φ80||Φ80|
Adopts XBS25-12-33 fine stone concrete pump for transporting
mortar. The comparison of mortar and fine stone transported by fine
stone concrete pump and mortar and fine stone transported by
,: , , , 3.2m2, .
As for the same working condition and construction structure, let's
take the ground handling of one site in Qingdao city as an example:
Both of them have three units with 32 floors and the total area is
32000 m2, the following is the comprehensive comparison between
fine stone concrete pumps and construction elevators for conveying.
1. Personnel allocation for fine stone concrete pumps as shown as
1, 2(4), 2, 2, 2, 4, 15.
One fine stone concrete pump operator, two sets of blenders and two
operators for each blender (totally 4 persons), two persons for
concrete supplying, two persons for ground cleaning, two persons
for concrete pouring, and four persons for smoothing ground,
totally 15 persons.
, 12m³/h(, 20m³/h), 12m³/h*8h=96m³, 5-6cm, 1920, 128, 17.
Generally, the average conveying capacity is 12m³/h (the data
includes machine shut down time, and the theoretical conveying
capacity of fine stone pump is 20m³/h), conveying capacity of every
day is 12m³/h*8h=96m³, and construction surface is 5-6cm in
thickness, so every day can make 1920, and the average work for
each people is 128, which totally needs 17 days for finishing this
2. Personnel allocation for construction elevator is shown as the
2/2/2/8/2/4/2, 22., 6, 120.06m³, 1612, 8, 12*0.06*8*4=23m³, 460, 21, 70.
Two persons for two sets of blenders, two persons for concrete
supplying, two persons for carrying sand and stone, 8 persons for
transportation, two cleaners, four persons for concrete pouring,
and two persons for ground smoothing, totally 22 persons. Usually, construction elevator can carry two transporting
vehicles at each time, low-rise floor costs 6 minutes and high-rise
floor takes 12 minutes for one lifting and each vehicle can carry
0.06m³, so each hour there can be 12 vehicles in 6 times of
transporting, if we take 8 people divided into four groups for
counting: 12 vehicles *0.06*8*4=23m³, so every day can have 460 and
per capita is 21, which needs 70 days for finishing this work.
Use S-valve to switch the direction, for fine stone concrete
Good sealing S-valve, installed with floating wear resistant ring
High-quality wear resistant alloy components for long service-life